Back to the collection

02 / Coastal art

Open tray lift.

Choose the open tray lift when the restaurant is low rise, space is tight and the budget needs a simple carriage for light dish traffic.

Plan this system
Studio product photograph of the open tray lift
Studio product photograph. Equipment reference only — final configuration to be confirmed for each project.
Front and side studio views of the open tray lift
Front view and side view. Equipment reference only — final configuration to be confirmed for each project.

The defining structure

Less enclosure.
More possibility.

Two open trays share one carriage and travel together on a vertical guide. There is no enclosed cabin. Rails fix to the wall and trays hang on the carriage, so installation stays comparatively simple.

Place dishes on the trays, send the carriage to the serving floor, unload and return for the next load.

01

Lower equipment cost

The open tray format is the more accessible price band when the kitchen mainly moves plates, bowls and light dishes.

02

Simple to install

Fix the guide to the wall, hang the trays and the carriage can run. The structure stays open and easy to understand.

03

Very little floor space

A footprint around half a metre by half a metre can be enough when the building opening allows it.

The service sequence

Follow
the movement.

  1. 01

    Place dishes on the trays

    Use the two trays on the same carriage to prepare the next delivery.

  2. 02

    Move the carriage

    The complete tray carriage travels to the destination serving point.

  3. 03

    Unload and return

    Remove the dishes, then bring the carriage back before sending the next batch.

Before you choose

The details
that matter.

  • Serving floors within about four levels
  • Available floor opening close to 0.5 m × 0.5 m and surrounding clearance
  • Dish dimensions and intended load, usually well below 150 kg
  • Guarding and access at each serving point
  • Destination country and requirements for the installation
Is there a cabin around the trays?

No. The defining feature is an open carriage with two trays. Guarding, landing access and other protective provisions must still be considered for the installation.

How many floors can it serve?

Plan for about four floors or fewer. Exact travel and stops must be confirmed for the model and building.

What load is realistic?

Treat about 150 kg as a ceiling. Day-to-day use is better for plates, bowls and light dishes than for repeatedly running near the maximum.

How much space does it need?

Many projects can work with roughly 0.5 m × 0.5 m, subject to the opening, clearance and guarding on site.

Is it the same as a continuous tray system?

No. An open tray lift travels out and returns as one carriage. A continuous chain system carries many trays around a loop and allows a different loading rhythm.

What should I share before choosing a tray lift?

Send the country, serving floor count, travel height, available opening and typical dish or tray size. Include the intended load and any constraints around the loading area.

Start with your project

Let’s connect
your service.

Plan this systemReturn to Coastal art